DIY windows restoration is not a very difficult task. Everyone will be able to restore the window. DIY windows restoration are carried out so that the window has a more beautiful appearance, and naturally retains heat in the room. Remember that the restoration of the window is an order of magnitude cheaper than buying a new window. Eliminating the cracks between the frame and the box is usually much easier than between the frame and glass. For this, a special seal is used. Its thickness is selected depending on the size of the gap itself. At the same time, the seal should make the window hermetic and not interfere with its closing. The seals are usually self -adhesive, but it is better to carefully prepare the surface on which it will be glued, for this you need to remove all the roughness with sandpaper, and then degrease the surface (for example, a solvent). After the seal is glued, it must be fixed with a stapler or small cloves. The frame of the frame when closing and opening the window usually occurs due to the loosening of the loops due to a slight drying out the frame and the loss of its original shape. To remove such a defect, you first need to check the loops that should be tightly screwed to the window frame. If the fastening is shattered, you need to replace the old screws with new. Better if they are a little longer than the old. Next, you should check if there is a backlash in the loops. If there is, then the loops are worn out. In this case, it is easier to simply replace them with identical. To increase smoothness when opening – closing the window, you can lubricate the loops with machine oil. It is better to replace the old accessories with a new. If such an opportunity is absent, then accessories such as spindle are best removed and cleaned from old paint. Then they need to be lubricated. Installation back should be carried out after staining so that they do not get the paint. For good painting, you need to remove all the irregularities and bulges present on the window, sandpaper, large defects are eliminated by putty on wood. After drying, the putty is aligned with sandpaper. For high -quality painting when restoring windows with your own hands, you need to remove dust in advance, which often form after putty and clutching. This is done using a solvent. So that the paint does not fall on the glass, it is glued around the perimeter with painting tape. Adhesive tape at the end of color should be removed. To get the optimal result of painting, it will be better to apply several thin paint instead of one thick layer.
3