The durability of the fence is directly related to the pillars on which it is based. Therefore, the priority task will be to install the support. Wooden pillars are afraid of air moisture differences. To strengthen their protective properties, you need to carefully process the material before installation. But in order to avoid trouble, it is better to give preference to metal pillars. They will not have to be additionally processed, and their operating time is an order of magnitude higher.
The technology for installing the fence
First you need to make a hole in the ground using a special garden storm with a diameter. The width should be 10 cm, and the depth – 50 cm. After that, install a pillar and drive it deeper, using a sledgehammer.
Be sure to track the level of each pillar, which is best checked with a special device. If there are even minor deviations in any direction, the fence will have every chance of being littered under the influence of weather conditions. To strengthen the support, the holes near the pillars need to be poured with concrete solution. If the soil is clay, this is not necessary, since dense soil is quite capable of holding the pillar. The gap between the supports should be 2, 5 meters. If you make it more, then the fence will begin to be touched.
The most reliable are brick pillars. On a concrete foundation, they can stand for more than 50 years. It is necessary to score a metal pipe into the masonry center, which will not allow the design to collapse.
Particular attention should be paid to metal pillars, which will need to be strengthened with a special jumper so that they do not part in the future.
Any material suitable for these purposes is suitable for filling spans between the pillars: rods, boards or metal mesh.
However, people who have a house opposite the road prefer to use decorative fences and fences for a summer house from steel corrugated board. This material is durable and wear resistant. But the techno of how to make fences from corrugated board knows far from everyone. If you fix it with self -tapping screws, you risk losing your fence, because it can easily dismantle the attackers. But the rivets are much more reliable. No person who is pushing your property will overcome them.
When choosing a material for the fence, quite often sellers advise acquiring an unpainted corrugated board, convincing the client that he does not plunge corrosion, since he undergoes hot zinc. But literally a year later you can notice dark spots on such material, and the loss of shine is also inevitable. To prevent corrosion, radical measures such as dyeing the surface with polymers are required. That is why it is better to give preference to painted corrugated board that will last you for more than a dozen years.