Buying an apartment in a new house a significant event for any. But immediately there are problems with the repair. Today, apartments are built with increased areas and improved layout. Residents are given with a slight cosmetic repair. Some developers leave completely without finishing, only the box. The method of the studio apartment is also used, then the owner can, at his discretion and desire to make partitions and divide the apartment into the desired zones.
Some consider the lack of decoration a significant advantage, because you can choose wallpaper, flooring to your liking, completely plan the apartment yourself. There are still no dismantling work, there is no need to correct defects that are caused by aging and wear of the material. For others, cosmetic repairs present when renting an apartment is the best option. Overhaul in a one -room apartment in a new building is not recommended, especially since the use of expensive materials in the decoration. The new house will shrink for some time for some time, as a result, skews of walls, angles are possible. Dear tiles can fall off, wallpaper to break or peel off, hanging ceilings crack. Therefore, it is better to postpone the overhaul. Enough light cosmetic will be enough. However, if you decide on costs, then it is better to use the materials of durable, capable of withstand deformation. For example, if wallpaper, then on a fabric basis, parquet or suspended ceilings only from natural wood.
A pleasant advantage during the repair of an apartment in a new building is the lack of furniture, extra things. At first, electrical work is carried out, holes are prepared for laying wires and for sockets. Then the pipes are wiring to plumbing devices. It is better to use metal -plastic, polypropylene pipes. In new houses, there are often cracks and bumps on the ceiling. Using a plaster mixture, the ceiling is aligned and put down.
Check the walls, if the deviations are significant, they will have to align them with lighthouses and plastering. It is worth paying attention to the windows, or rather to their tightness. Most likely, builders used cheap poor -quality foam, as a result, drafts appear. You can eliminate such a defect yourself. At the very end, walls, ceiling, floors finish are made out. It remains only to apply some design ideas and the work is over.