Although, that the construction of Floor-MAT-LA for the main laying begins with the choice. The selected Floor-Mat-La will depend on the reliability of the property of the entire structure. The choice of Floor-MAT-LA for the base directly depends on the choice of Floor-MAT-LA for the installation of the walls. The most crucial step of civil work is this installation of walls. The quality of the built walls depends on the chosen Floor-Mat-LA. More often others in the construction of garages, private places of residence, provide a dwelling with brick, wood, aerated concrete wall coatings of use “aerated concrete and gas stuna”, concrete of foam and foam blocks. As a result of the rapid development of technology, there are the newest wall Floor-Mat-Ly, which is excellent, surpass the long-known Floor-Mat -Ly. Any of the materials has positive phenomena and distinctive features that the builders need to consider. The core that needs to be kept in my head controlled uniformity, in other words, all the walls to be obligated to be built of homogeneous Floor-Mat-la, and lean against the homogeneous main monolith. In that image, the dependence between the base and the walls is obvious. Ostele the most famous building material with brick. Its positive phenomena are heavy in order to evaluate too high: it is light, strong, environmentally impeccable, brick structures are long and disagree with the duration. The brick walls are blocked by a plate of reinforced concrete, and this allows you to build large rooms. Brick is indispensable in creating parts of the situation. Thanks to the brick is possible to create the walls of difficult configurations. But there are also defects. For example, brick absorbs water that moves to the occurrence of dampness. This is not possible, which is the phenomenon, the wall from the brick sets a thick one, which moves to the additional costs. Brick thermal ability and a defect immediately: if a country house, the time was not heated, it will heat it quite difficult. There are many defects in the forest Floor-Mat-Ly in all its own suitability and simplicity in the statement: subordinate harmful insects of laziness, the difference in temperatures in regular intervals causes decay, there is a danger of the origin of fire. Porous concrete, such as aerated concrete and concrete of foam, is similar in its own structure, that Snutri their time moderately takes places. Iron of concrete of porosity improves its Physicotechnical properties. The weight of foamy concrete, small due to filling by time, which allows them to call their light Floor-Mat-Lami. Concrete foam and foam blocks, unlike aerated concrete, which becomes a factory method, it is possible to make it directly close to building small sides. The foam is pre -impleased concrete the route to fill the cement mortal special foam. The density of foam concrete blocks is possible to adjust by configuration of the volume of components. Components-environmentally impeccable build Floor-Mat-Ly, therefore, concrete foam is not dangerous for the health of a resident of our planet. In the construction of two – three -Storyed concrete foam buildings applied to the installation of wall relations. Low density blocks are used to heat the walls. Aerated concrete approach of the blocks for the country’s civilian work private places of residence are successfully used in the construction of Monolitno-Karkasy-Doms, in the construction of 2-mm and three-Storyed technical. Aerated concrete and gas storage are artificially made stones, environmentally friendly, strongly. Contains approximately 40-80 % of time, this property promotes heat and noise isolation. Aerated concrete is easier than a tree, it, just like a brick, belongs to protecting a high quality temperature. In Europe, aerated concrete began to be used in the middle of the last century, where, thanks to good lines, it received an extensive statement. Structure from aerated concrete is strong, do not give shrinkage. The gas concrete becomes a route of supplement in a cement mortal, crushed to exhaust, quartz sand, stones from a patch and dural powder. In the ward, where the highest humidity has been created, an increase in solution and will be transformed to the plate of aerated concrete. The plate was reduced on blocks and puts in an autoclave in order to strengthen. This is used aerated concrete depending on the density. Low density blocks go when heated by walls, blocks with a density of 400-500 kg / cubic m. It goes when building two – three -Storyed buildings. The highest structures are most required by gas concrete blocks with the highest density. In a step of laying the foundation, it becomes clear that from an economic point of view, aerated concrete is the most favorable. Aerated concrete light material therefore there is no need to identify a very deep main monolith that does not attract the costs of additional. The application of blocks does not ask special qualifications of workers. When building a prerequisite by a 300KV area. M. Five -six days leave, and this is much less than leaving when building brick walls. To be sure of the quality, aerated concrete, by choosing, is going to cope, standards say that 25485-89 “cellular concrete. Specifications “.
3