The gas burner control device is designed to control gas burners of various types and allow automatic ignition of the burner, power control and its protection.
The control device of the UGG-02 gas burner is a microprocessor device that provides management:
– fan;
– locking electromagnetic valves;
– roding device;
– drives of the shutter of the burner.
When working, the device provides the following parameters:
– exceeding maximum or drop below the minimum gas pressure
– The presence of a torch torch
– water pressure or water temperature
– The air pressure of the fan
– Stop fan
– Dissotage in the firebox
Indication of the cause of the emergency stop is provided. There is a built-in “-channel circuit for control of a torch for an ionization type sensor. The device has a RS-485 communication channel to exchange information with other systems.
There are software options for two -position and multi -position burners. Software can be easily adapted to the specific requirements of the customer.
The overall dimensions of the plastic case IP43 130 x 130 x 75 mm.
Power consumption from an alternating current network of 220V 50 Hz does not exceed 5W.
There are several options for devices for hot water and steam boilers and for burners of different types:
UGG -02 – for gas burners of the GBB -like and similar ones;
UGG-02-VK for a hot water boiler;
UGG-02-PK for a steam boiler;
UGG-02-P for gas percussions;
Uugg-02-kg-s tightness control.
All devices have a certificate of state standard and permission of the Gosgortekhnadzor.