Laminate becomes a very common type of flooring. Today, laminate is very widely used in most houses and rooms. Now the laminated floor is definitely surpassing the flooring of natural wood in operational properties. The laminate is characterized by a special fortress, besides, it is not at all afraid of the action of ultraviolet rays. Note that such material will not lose color over time. Laminate does not require special efforts to maintain. Various chemical cleaning substances can be safely used to cleanse the flooring.
In certain situations, even solvents can be used to clean the laminated floor, such as acetone. Laminate slabs from a certain number of layers. The minimum number of layers is four. The middle layer of the laminate plate is usually the basis. The strength of the laminate plate will directly depend on the density of the main layer – the higher the density, the more reliable the plate. The supporting part of the laminate is covered with special paper, copying a variety of materials, natural, often natural wood or stone are especially common. It happens that simulation of tiles is used.
Paper is mandatory impregnated with acrylic resin in order to protect the laminate from various damage. A layer of dense cardboard, which is located under the supporting, is impregnated with paraffin. Such a lower layer gives the coating the property to absorb the noise. Sometimes plastic is exploited as the lower layer. It contributes to the implementation of a significant problem – prevents moisture from getting into the laminate plate. For the production of laminate plates for flooring, usually two different methods are used – laminated plates of direct and high pressure are produced. High pressure laminated coating is made using very high pressure. Direct pressure laminate has a more acceptable cost than laminated tiles of high pressure. With direct laying on the floor, laminate tiles do not need to be fixed.
You will not have to buy nails and glue, because the laminate has enough your own weight to confidently position. However, the laminate panels must be interconnected. In such cases, two different options are distinguished – adhesive and bloodless. With an adhesive method for attaching, there is a special glue. With a technological about the side, this is a fairly difficult process that will require the presence of specific skills you have.