A very important element of the kitchen space is the mixer, so you need to suck with all the seriousness to its choice and installation. Today, the Kaiser mixer for the kitchen is very popular, which can be purchased at an affordable price. If a countertop is sewn into the sink, water pipes are installed in the walls, then you can proceed to the installation of the mixer for the kitchen. You need to start with preparatory work. First of all, it is necessary to get a divorce key, a screwdriver, pliers, wrench and fum tape. Next, the workplace is prepared. It is worth remembering that when performing any work related to plumbing, it is necessary to block the water. To install a new mixer, the old one should be dismantled.
To remove the old mixer, you need to use a divorce key. The key is unscrewed by the nuts of the hose, which is attached to the water pipes. Then the studs are removed, and the old device is removed. If necessary, then the seat is cleaned using special powder means. After all the preparatory work, the installation of a new mixer begins.
First of all, the winding of all threaded connections and adapters FUM-tone is made. Next, the nut is unscrewed for fastening from the mixer itself and is connected to adapters. Then gaskets are installed. Adapters from under the sink carefully stretch. Backs are twisted with the mixer and adapters. The connection is fixed first manually, and then with a key. The connection is sealed with a fum-tent. At the last stage, the mixer on the sink is fixed. A special nut is used for this. It is not at all difficult to install a kitchen mixer with your own hands.