The fact that the entire existing series of grouting polymer -cement mixtures under the general name “Vetonite” fully complies with the requirements and rules of the construction standards of Europe forces to treat him with respect.
But there is not enough one correspondence and opinion of expert commissions to get into the premium class of its type, and become one of the most popular materials from professional finishes. This will also need to be able to like the finishes themselves. And in grouting mixtures Vetonite it turns out to understand why, and see the products of this ruler can be found on the page
Firstly, they have a large area of application. These grouts can be used in work with tiles of ceramics and porcelain tiles when facing walls and flooring, both outside and indoors. Including during trim tiles and columns of different configurations. In addition to facing work, they can be used as a filler of brick masonry seams – after complete hardening, the finished surface will not give in to the masonry, where the usual solution was used.
Secondly, it does not matter what basis the tile is laid, it can be brick, concrete or aerated concrete-the grouting mixture of vethonite is suitable in any named situation. But, most amazing, it can be used even during cladding of drywall surfaces.
The only restriction is that this material cannot be used in the arrangement of pools. But in standard rooms with high humidity (bathrooms, bathrooms, kitchens) this grout will come in handy.
Thirdly, the grouts of the vethonite of a large color range. More precisely, the main colors are three – white, gray and black, but the variety of shades allows you to choose the desired material for almost any type of tile.
Convenience in working with grout mixtures Vetonit adds a large working period of the finished solution-after kneading, the grout can be used within 4 hours. On the contrary, the drying period is quite short-after the 2nd day, the wall cladding completely dries. When arranging the floors, the drying period is about the same, but it is recommended to wait with their operation for about 2 weeks-this period will be required to turn the flooring into a monolith.
The air temperature during work should not be lower than +10 ° Celsius, and during the set of the solution it is advisable to moisturize the surface, but at the same time it is not allowed to accumulate moisture.