It is difficult to imagine a good rest in the country or in a private house without relaxing bath procedures. However, not every owner can boast of his own bath, especially if there is no financial resources for the hijack of a specialized construction team. Is it possible to build a bath on your own? With great desire and focused hard work, there is nothing impossible. We will help to answer some of your questions and make sure that the construction of the bath with your own hands (video and photos are attached) is quite real.
First, you need to decide on the location of the poor bathhouse. The premises of this kind need to be built no less than five meters from the main house.
This is due to constant sharp temperature changes and damp, which adversely affects the building material that was used in the construction of housing. The land for the construction of the bath should be even, dense. Well, if there are no wells or a bet nearby, which will reduce the amount of moisture in the air. If possible, the entrance doors should go south, t. To. It is on this side that in the winter there is less a snowdrift, and in the summer it is always sunny. An ideal option would be the construction of a small pool not far from the exit, which will be filled with cold water during the period of direct use of the bath.
Bath construction material
The foundation for a standard one -story bath in the depths should be about a meter. Before making a screed, it is necessary to lay a layer of waterproofing material, such as roofing material.
Building a bath with your own hands
The walls are laid out with foam blocks, slag blocks, fire -controlled bricks in general with any heat -resistant material. Outside, the walls can be sheathed with plastic, plastered and painted with special paint for external use. The roof in the bath is practically no different from the standard structure of the buildings. You can use Andulin, Metal Cross, slate, etc. D. The main thing is to keep the heat inside, and then the external coating will last a long time.
Interior decoration of the bath
Tile tiles with a reflected surface usually lay on the floor to prevent the fall on the slippery floor. It is better to put a wooden pallet on the top of this plate, which will allow maintaining the surface relatively dry.
The walls and ceiling are necessarily thermo and moisture resistant materials, along the top of which wooden sheets are applied. When designing internal design, it is advisable not to use metal parts. The door of the steam room should open in the dressing room and have a small glass window so that people from the outside can see what is happening inside.
The main thing is to stock up on patience, and your dream, have a house with a bath projects that can be found on the Internet, be sure to be realized.