Balka 10, it is also the I -beam – this is a metal rolling product used in the construction of supporting structures. For many years, the product has been successfully used in the construction of various buildings and structures. It is safe to say that this is the most popular species among other steel beams. This position is explained by high strength. It is much tougher and stronger than other similar products, for example, such as a steel beam with a square profile of equal section. In general, products with an I -beam profile are 7 times stronger and 30 times tougher than a beam with exactly the same cross -sectional area, but a square profile. Such strength characteristics are facilitated by a special N-shaped section.
Balka 10 is actively used in the production of various metal structures in industrial and construction areas: on workplace, crane beams, in ceilings, overpasses, in car construction and in the automotive industry, for reinforcing mine trunks, the construction of bridges and for many other building structures. The use of this product during the construction of structures allows us to achieve a significant reduction in the weight of the structure itself, without affecting its strength, leaving it at the same level.
It is produced by a hot -rolled method and is a product of a shaped profile that serves for the general (mass) consumption. Technical conditions for manufacturing, as products of shaped rental, are indicated in GOST 8239-89. Marked with indelible paint.
It is classified depending on the width of its faces: broadband, normal, column, with parallel or non -parallel faces. The product withstands the tension to bending, stretching and static compression. Most often it is used in supporting structures and mechanisms of constant loads and bending. Balka 10 is perhaps the most effective and reliable solution for the construction of supporting structures. This is also confirmed by the use of such a product as an I -beam in the construction of the subway.
Balka 10 – this is the minimum in size of the beam among the imptitage beams.
Any structural elements, including beam 10, are subject to seasonal price fluctuations. This is clearly visible on the example of rally beams. In winter, the price decreases greatly, and in the summer, at an active time of construction work, the price increases markedly.