Imitation of the beam is a wooden product that is very popular in the construction sector. Boards are planned and processed on both sides, connected by means of shopuntes and grooves. Imitation of the beam allows you to recreate the illusion of a natural cozy house made of wood. As a rule, this material is designed for lining the external and internal walls. Imitation for a wooden beam is a profitable solution for finishing the cottage, house or cottage.
Laying imitation of the beam occurs using a crate, which has the form of bars. They are placed around the entire perimeter of the walls and fixed vertically, fixing with self -tapping screw every 40 cm. To learn more about the stages of the decoration of houses will help you with construction and repair tips.
After the installation of the finishing material imitating the beam is made, you can proceed to putty, the priming of the walls and protecting. As protection, you can use varnish compositions that need to be selected based on your own color preferences. The varnish should be applied to several layers (1-3 layers), while you can use special tinting impregnations to emphasize the shade.
It is recommended to restore the protective layer from time to time, tinting the material imitating the beam in places of active exposure to sunlight. House finishing is a wise solution that allows you to extend the operational period of construction, give its original appearance and protect from the negative effects of the environment. I peered these tips on the site
So that the decoration of wood does not become unusable, its surface is necessarily covered with special protective means. To protect material made of wood from harmful insects and decay, there are antiseptic compositions, due to which a protective film is created that prevents the penetration of pests into the structure of the tree.
Installation of the first row of bars begins from below, which are attached on top of the casting board. The masonry of imitation of the timber is carried out by a comb up, then the boards are fixed with screws, sinking a hat to a depth of 1-2 cm. The next row is placed in the spike of the previous beam and is tightly connected. The spike must be fixed with a self -tapping screw, screwing it at an angle of 50 °. The final row is also fixed with self -tapping screws, as the first. Manually screwed screws are closed with bumps, and then these areas are polished.