Any construction of the pool takes place at certain stages:
Carrying out all preparatory work on the supply of communications (water, grounding, electricity), marking the site;
Earthwork. Preparation of the pit: manually or special equipment, if there is the possibility of its entrance. Excavation from the site;
The end of the preparatory phase of the construction of the pool is to fill the bottom of the pit with a pillow of sand, arranging a concrete slab of the base.
Installation of the pool in the pit;
Binding of the pool with pipeline reinforcement and insulation of the walls with polystyrene foam;
Promoting the walls of the pool with simultaneous pouring water into the bowl;
Connecting pipes to equipment and communications. All equipment for pools is installed no further than 5-8 meters from the pool. The area of the room for equipment is approximately 1, 5-2 kV. m.;
The final stage in the construction of pools is the arrangement of the “Boar Zone”. Her bias should in no case allow rain water to drain into the pool.
Every year, more and more people living within the city, dream of buying or building a country house. And of course, most have a desire to build a pool with the house with the house. Nowadays, the pool is not only convenience and prestige, but, above all, a great opportunity to turn your country house into a resort. Many are decided to independently build the pool, despite the fact that many specialized companies are engaged in the sale of Moscow pools, and they do not suspect that the construction will proceed for many years, because the modern pool is a complex hydraulic construction of which includes not only one pool bowl, but also complex engineering systems, which are most often connected to communications of a residential building. At the stage of design and construction of the pool, there should be a solution to a whole set of tasks, which includes: directly installing the pool bowl, laying the pipeline system, installing special filter and dosing systems. Each pool must have a system of energy supply, lighting, ventilation and a water heating complex. Today, there are a huge number of pools and ways to make them. Making containers for pools is a complex process. But, despite such a wide variety, the most economical and reliable production technologies are considered to be polypropylene pools – durable, resistant to ultraviolet radiation, environmentally friendly plastic, with a huge choice of color scheme. The thickness of the material is from 5 to 15 mm. Polypropylene is plastic, which is environmentally friendly and resistant to adverse environmental conditions. The production of pools from polypropylene makes it possible to make completely tight basins of various shapes and sizes. Polypropylene pools have such remarkable properties as low thermal conductivity, due to which it is possible to maintain the desired temperature in the pool for a very long time. Polypropylene pools also allow you to use other equipment, such as backlight, hydromassage, antipolis, waterfall, etc. Such details can be found from our specialists. Every year, polypropylene pools are gaining more and more popularity. Another plus of polypropylene pools can be called its assembly ability. These advantages will be fully evaluated by those who install the pool in the already built building. From an engineering point of view, the pool is, first of all, a water purification system in which filtration, recirculation and constant disinfection are continuously carried out due to the equipment of the pool. Equipment for the pool includes electric water heaters or heat exchangers, a filter installation for pools, skimmer, nozzles, air drifters in the pool room, underwater vacuum cleaners for pool cleaning and many other accessories. The key to the pleasant and comfortable use of the pool is the availability of engineering equipment that provides water cleaning. Installation of engineering equipment should be performed by professionals.