Home Home ideas Tips – how to equip a corner fireplace with your own hands

Tips – how to equip a corner fireplace with your own hands

by 360roomsnews

Corner fireplaces are arranged as the name implies in the corners of the room. This location is very convenient due to the fact that it does not require significant space, which means that the corner fireplace can be arranged even in a small room.

At the same time, placing cozy soft sofas and armchairs around the hearth, you can arrange a warm recreation area in the house.

By placing a fireplace in the corner of the room, you can create a very attractive space in aesthetic attitude. Achieve the greatest harmony in this case, you can orientate the furnace along the axis of the angle formed by the walls.

You can equip a corner fireplace with your own hands anywhere in the room near the outer or inner wall. At the same time, the correspondence of its dimensions (height and width) of the dimensions of the room is more important.

In addition, about to arrange a wood fireplace, it is important to take into account the fact that the walls of the furnace and chimney in this design will be subject to serious heating. Therefore, their direct contact with the surfaces of the walls, especially if the latter are made of wood, is extremely undesirable.

As a rule, the arrangement of corner fireplaces resort to small rooms. In this case, the dimensions of the structure are determined in accordance with the area of ​​the room itself.

In this case, the dimensions of the structure (height-shirin) should be correlated as 2: 3, in addition, the depth of the firebox should be ½ or 2/3 of the height of the portal.

In case of non -compliance with these proportions during construction, the heat transfer of the hearth is significantly reduced, in addition, the probability of smoke of the room is also not excluded.

Certain requirements are also presented to the size of the chimney, in particular it should be 8-15 of the fire area of ​​the firebox. In this case, this rule is common for fireplace pipes of any form.

The main dimensions of the structure are determined by the area of ​​the cross -section of the firebox. At the same time, it is also worth paying attention to the fact that starting from 1/3 of the height, the rear wall should be extended.

You may also like

© 360Rooms – 360-rooms.com, 2017-2024. All Right Reserved.