Use gas for heating and heating water, in comparison with other energy sources, the most effective way in every sense. Both in price and reliability and security. One of the types of heating appliances actively conquering the market are wall boilers. This location turned out to be the most optimal. Communications are brought directly to the device and do not take up much space. The entire floor area in the room is free and this allows you to effectively plan the location of other interior elements.
Wall -mounted gas heating boiler
The design of the boiler is simple – the gas heating pad heats the heat exchanger, which increases the temperature of the water to the required values. However, the reliability and high security level required today forces manufacturers to produce very technological products. Despite the apparent simplicity, this is a complex device with thin tuning and reliable protection of health and user life. This is the check valve when water supply, which does not allow the return stroke and the excessive pressure, as well as the accurately adjusted temperature sensors and control over the burning.
Wall heating boilers gas
Gas wall-mounted heating boilers, a photo of one of which is located on the left, is rightly called mini-knit. For the functions performed, single -circuit and double -circuit devices are produced. They differ in the fact that in the first case, one closed circuit provides only heating. The device with two separate tanks is intended not only for heating the room, but also for supplying warm water. This greatly simplifies the choice. Why purchase a duplicate device. If there is a water heater, then it makes no sense to buy a dual -circuit boiler. You can connect yourself only if there is work experience, since the incorrect installation of some parts can lead to improper operation and failure of the device itself.
But the most important thing is the life and safety of people, so it is better to entrust the installation of professionals. In addition, it is not recommended to connect gas yourself. The right to work with this type of communication is allowed only to specialized organizations or companies that are engaged in the construction of boiler houses. In order to avoid troubles with employees of controlling structures, even from the installers of the seller’s company, you should ask to present an appropriate permissive document. After installation, it is necessary to test the device in all modes. The power of the heating element and the volume of the water tank is selected, based on the estimated consumption. You should not make a large supply, since this is an excess of energy overspending. Too small a tank volume or insufficient power will make you wait quite a long time.