To restore the bath, it is necessary to use the product of epoxy, consisting of a hardener and the basis. Such material has a characteristic highest viscosity, and some species can be very flowing, which are difficult to manage during application. In fact, the restoration of baths is not a too complicated process.
The main criterion before the restoration of the bath is that the bath should be completely white in front of the process of the bath, otherwise, if this is not the case, after the work of the work, gaps will remain on it. It is best to start the restoration of the bath from the edge, you need to put the jar with the enamel on the bottom of the bath. It is advisable to choose a brush for application with hard and natural bristles. Do not forget that the brush can climb, for this it is necessary to prepare a painting knife, which will be removed.
Having moistened the brush in enamel, it is necessary to apply a thin layer to the edges of the bath, while moving from one side to the other.
Then you need to move to the side. Coloring it is required to make a downward movement, and then horizontally level the stripes evenly, until a uniform layer is obtained. Also do the bottom of the bath. Now you need to apply the second layer immediately, without waiting for the first.
So, now the second part of the enamel is breeding and all the perfect actions are repeated to apply earlier. If the enamel still remains, it can be poured onto the bottom of the bath and evenly distribute with a brush. After the expiration of twenty minutes, if there are smudges, then they will need to be evenly spreading from the bottom with the top. After the end of all work on restoration, it is necessary to rinse the brush and close the bath for five days so that the enamel can finally harden. After passing the deadline, you can safely admire the updated bathroom.