The log is very voluminous material, respectively, a house built using this technology, after a while, will shrink. After all, in the production process, it is very difficult to suffer a logs to sufficiently. Today, when building a wooden house, it is very popular with the use of a gallected log. This greatly facilitates the construction process.
Most often, such a beam is made of pine. Manufacture occurs on special machines, with which the workpiece acquires the necessary size. Landing head, insulation groove, spikes, wedge -shaped locks, even side sides – all this acquires a beam precisely after the processing process of not the machine. The use of this material allows you to abandon further finishing work of the house from a profiled timber associated with covering logs, impregnation, etc. D. As a result, housing becomes completely environmentally friendly.
The log is very voluminous material, respectively, a house built using this technology, after a while, will shrink. After all, in the production process, it is very difficult to suffer a logs to sufficiently. To minimize the shrinkage for the production of timber, use wood, which was prepared in winter, t. To. it has a longer drying time in natural conditions.
Thanks to modern technologies, many companies are engaged in the manufacture of glued profiled timber.
For the manufacture of this material, several parts are necessary, which then glue among themselves. Thanks to this, you can buy a house from a beam inexpensively.
At the beginning of manufacture, the logs are sawn on boards of the corresponding size. After that they go through drying. Then all identified defects and disadvantages are removed from the boards. The resulting boards occur the process of fraining. As a result of the production process, lamellas are obtained – these are boards that are glued together. Then, using a special press, the lamellas sticks together and glued beam is obtained. In the manufacture, glue with increased waterproof properties is used.
To give greater strength and stability, the boards are glued so that the direction of the wood fibers does not match. Such a gluing system protects logs from their changes in the geometric shape. After the lamellas are glued into the array, it falls on the high -precision machines, where he is given the necessary sizes and profiles. Processing on machines is carried out very carefully and carefully, t. To. It is at this stage that the grooves in the beam are cut out, which then guarantee the accuracy and density of the bars of each other. Despite all the advantages, this material is not quite durable, especially compared to a solid log.
Advantages of using profiled material: building quality, convenient and quick installation.